Detailed Joinery & Graphic Fit-Outs

Brisbane Regional Flavours - The Hunting Club Signage and Beer Paddles

This is a great little project we were involved in for the Brisbane Southbank Regional Flavours Food Festival. We produced some laser cut timber signage for The Hunting Club, which is a beer and cider tasting event running over the festival. We also made some laser cut and laser etched beer sampler paddles. They turned out great and should go down well with the crowd at Regional Flavours.

The-Hunting-Club-Laser-Regional-Flavours-Cut-Timber-Signage-Potato-Press

The-Hunting-Club-Laser-Cut-Timber-Signage-DETAIL-Potato-Press

Laser-Cut-Signage-Ply-wood-Timber-The-Hunting-Club-Regional-Flavours-Potato-Press

Regional-Flavours-Laser-Cut-Wood-Ply-Beer-paddle-Laser-Etched-Logo-The-Hunting-Club-Potato-Press

The-Hunting-Club-Regional-Flavours-Laser-Cut-Timber-Beer-sampler-paddle-Potato-Press

The-Hunting-Club-Regional-Flavours-Laser-Cut-Timber-Beer-sampler-paddle-Laser-etched-wood-productionPotato-Press

 

image_southbank

Laser Cut Layered Potato Press Signage

Here is a piece we did for our studio. It is laser cut and laser etched timber. It is then painted and layered together to make a nice little typography sign.

This sign also compliments our new Potato Press branding. We thought it was time for a bit of revamp. We hope you like it!

 

Laser-Cut-Signage- Laser Etched Typography-Potato-Press Laser-Cut-Signage-Typography-Potato-Press Laser-Cut-TYPOGRAPHY-Signage-Laser-Etched-Gold-Coast-Potato-Press Laser-Etched-Signage-Laser-Cut-Typography-Potato-Press-Australia-Brisbane Laser-Etched-Signage-Laser-Cut-Typography-Potato-Press-Australia Potato-Press-Logo-New-Branding

 

Lone Pine Memorial Plaque

We were approached by the Inverell RSL to produce a memorial plaque for the Battle of Lone Pine at Gallipoli. What made this job special was the fact that we were to make the plaques from the timber from a seedling of the original Lone Pine of Gallipoli.

The story goes…” Two brothers, Benjamin and Mark Smith from Inverell, NSW were involved in the capture of the Lone Pine positions. Mark was killed in the action. Benjamin, a Lance Corporal, noticed that the Turks had been using the branches of a Lone Pine tree to cover their trenches. He saw that trees had been destroyed in the battle and it is probable that his thoughts went home to his mother who was well known for her “green thumbs”. He plucked one of the cones from the destroyed tree and sent it to her. Benjamin’s twin brother, Bert also enlisted in the 1st AIF. The mother planted three seeds shed by the cone and like the story of the three boys, two trees lived and one died. In 1930 Mrs McMullen, the boys’ mother sent one of the trees to Inverell where the boys had lived, the second tree was sent to Canberra for the opening of the War Memorial. The Duke of Gloucester planted the tree on 24th October, 1934 dedicated to the memory of Mrs McMullen’s son, Mark and other sons who fell at Lone Pine. The timber used in this plaque is from the original Lone Pine seedling. The tree was felled in 2007 due to safety concerns.”

So our joiner, Rex, milled down the slabs of pine from the Lone pine seedling and put together this large timber plaque. We then designed the the plaque using images and maps from the battle of Gallipoli. The plaque was presented to the city of Inverell on Anzac day, The unveiling of the plaque was made by Member for New England, Tony Windsor and Ms Ruth Smith, a niece of the Smith Brothers.

We here at Potato Press are extremely proud to have been a part of this amazing project and we would like to thank Hans and everyone at the Inverell RSL Sub Branch for asking us to be involved with such a memorable job.

More images and stories can be found at the Inverell Times and The National Daily Leader.

Laser-etched-Custom-designed-Plaque-Lone-Pine-Memorial-Inverell-Potato-Press

Laser-etched-Plaque-Lone-Pine-Memorial-Inverell-Potato-Press

Laser-etched-Timber-Custom-designed-memorial-Plaque-Lone-Pine-DETAIL-2-Potato-Press

Laser-etched-Timber-Custom-designed-memorial-Plaque-Lone-Pine-Potato-Press

Lone-Pine-Memorial-plaque-Air-Force-Potato-Press

Laser-etched-Custom-designed-Plaque-Lone-Pine-Memorial-DETAIL-2-Potato-Press

Laser-etched-Custom-designed-Plaque-Lone-Pine-Memorial-DETAIL-Potato-Press

Custom-designed-Plaque-Lone-Pine-memorial-Presentation-Inverell-rsl-Laser-etched-Timber-Potato-Press

Laser Etched Recycled Timber Sign for Village Bean Cafe at Movie World

Here is a great project we just finished for the crew out at Movie World. It went up on the wall at the Village Bean cafe inside the park. The sign was made from reclaimed hardwood timber with a rough white wash finish to give a weathered effect. We then laser etched the recycled timber with a deep burn to get great contrast. The finished product turned out great and looked fantastic on the wall of the cafe.

Villiage-Bean-Cafe-Laser-etched-recyled-timber-sign-movie-world-mounted-to-wall-potato-press

Movie-World-Villiage-Bean-Cafe-Laser-etched-timber-sign-CLOSE-UP

Villiage-Bean-Cafe-Laser-etched-timber-sign-movie-world-detail1

Movie-World-Villiage-Bean-Cafe-Laser-etched-timber-sign-CLOSE-UP2

Movie-World-Villiage-Bean-Cafe-Laser-etched-recycled-timber-sign-fullsize

Pearson Education Large Wooden Scrabble Blocks

We were approached by Pearson Education to create some oversized scrabble pieces made from wood. The pieces ended up being about 200mm high and 100mm deep. Each piece was Laser Etched and paint filled and then individually cut out by our Joiner, Rex. We ended up doing a few sets of the whole alphabet. It was quite a large job, but it turned out really nice and Pearson Education were stoked with the final product!

 

Lu Lu Lemon Store Graphics

The lovely people from Lu Lu Lemon Athletica contacted us to create an art piece for their store at Carindale. The brief was a hampton’s style beach theme which incorporated the brands imagery and some of their key phrases. We also had to design it so that the staff can interchange the images and phrases with ease. So the final product was a combination of wood and whitewash, laser cut white mdf and reverse applied acrylic prints. Both the printed acrylics and laser cut lettering are mounted with stainless steel standoffs which are easily changed and replaced. The guys were very happy with the final product and it looked great in the store.

RHYTHM LASER ETCHED SIGNAGE

One of our recent projects was this amazing Laser Etched Recycled Timber Signage for the Rhythm Head Office in Burleigh Heads.
The sign itself was hand made by our joiner Rex from Naramaa Joinery. The timber is reclaimed Australian Hardwood from an old farmhouse in Northern New South Wales. Then Rex gave it a slight white wash finish with a marine grade varnish over the top to prevent weathering. We then finished it off by Laser Etching the Rhythm logo and mounting it to the building.

Here are some images of the process and finished product.

Coolangatta Surf Graphic Fit-Out

We recently did some store graphics for Coolangatta Surf and Billabong. The graphics mainly co-inside with Billabongs “Life’s Better in Boardshorts” Campaign.
The graphics turned out great, especially the large image of Parko on the outside of the building. Check it out next time you are driving through Cooly!

Alpha Flight Services - Graphic Fitout

Here is an Office Fit-out we recently finished for Alpha Flight Services. The graphics had to be designed so that the different airline logos can be replaced. The fitout consisted of printed and cut frosted vinyl and laser cut signage.

Here are some images of the Project…….

Cooper & Westwood Office Graphics

Here is a recent office graphic fit out for Gold Coast Advertising Agency, Cooper & Westwood. They recently moved into a new office space and asked us to do some graphics throughout the office for them.
We did Printed and Vinyl Cut Glass Graphics, which flowed through all the windows in the office.
We also did a Laser Cut Timber Screen for their boardroom window. We used Fijian Ply, which has a nice grain and colour to it.

Check out the finished product……

Laser Cut Mosaic Screen

Today we put up our Laser Cut Mosaic Screen in our mezzanine studio.

We got our Joiner, Rex Casson from Naramaa Joinery, to make a rail for the top and bottom anchor points. He used a beautiful old piece of Camphor Laurel he had at his factory.

The panels themselves are Laser Cut from 3mm MDF Board. We used MDF because it is nice and cheap and the Laser loves cutting it.

We used a rail system with stainless steel wires and clamps to hold the panels in place. We intend to change the image every few months, so the rail system gives us the flexibility to switch the size and the amount of panels used.

It turned out great! The best thing is, you can see it from both upstairs in the studio and downstairs in the front reception. Drop by and check it out!

MCG Office Graphics

Here are some shots of an Office Graphics fit-out we did for McCarthy Consulting Group, in Southport on the Gold Coast, late last year.

All Concept and Design was done in-house by our design team, as well as all Production and Installation.

Front Reception – Customised Printed Textured Wallpaper, 30mm Routed and 2 pak MCG sign and Laser Cut Lettering across Front Reception Desk.

Office Window Graphics – Printed and Contour Cut Frosted Etch Reverse Applied with Vinyl Cut MCG Logo Face Applied.

Front Entrance Doors – Frosted Etch Reverse Applied with Vinyl Cut MCG Logo Face Applied.

Hand crafted design solutions for forward thinking industries

Some of our valued clients

Quiksilver
Village road show
Chobani
Nasa
John Holland
Vittoria Coffee
War Memorial
Hurley
Stone & Wood
CGF
Olympus
Gunnersen
Nike
Village Road Show
Hexxfx
Queensland Health
Coopers Brewery
Australian Government
Ripcurl
MCG