Posted: 25th March 2011
Posted in: Laser Etching & Router Cutting, Point Of Sale & Marketing Material
Here are a few images of Laser Etched Pens and Pen Boxes. The boxes are Handmade by Rex Casson at Naramaa Detailed Joinery.
Rex’s wood work is amazing. Check it out.
Posted: 2nd March 2011
Posted in: Point Of Sale & Marketing Material
We have been doing a few vehicle graphics for the guys over at Hinterland Mowers in Nerang, Gold Coast. We just finished our fourth vehicle for them. 2 Trucks and 2 utes so far.
Here are some pics of the finished products.
Posted: 16th February 2011
Posted in: Design & Illustration
We did a Foiled Wine Label for our good friends at The Measure. It was used for their Christmas / End of Year gift to their clients. Designed by the guys at The Measure.
Super clean, crisp design…….. So much so, it was featured on the Package Design Blog, Lovely Package………Check it out HERE.
Posted: 4th February 2011
Posted in: Laser Etching & Router Cutting, Detailed Joinery & Graphic Fit-Outs
Today we put up our Laser Cut Mosaic Screen in our mezzanine studio.
We got our Joiner, Rex Casson from Naramaa Joinery, to make a rail for the top and bottom anchor points. He used a beautiful old piece of Camphor Laurel he had at his factory.
The panels themselves are Laser Cut from 3mm MDF Board. We used MDF because it is nice and cheap and the Laser loves cutting it.
We used a rail system with stainless steel wires and clamps to hold the panels in place. We intend to change the image every few months, so the rail system gives us the flexibility to switch the size and the amount of panels used.
It turned out great! The best thing is, you can see it from both upstairs in the studio and downstairs in the front reception. Drop by and check it out!
Posted: 4th February 2011
Posted in: Laser Etching & Router Cutting
Here is a project we did for BDA Architecture on the Gold Coast. It is a Laser Cut Land Contour Model for a development in Malaysia.
It took almost a full week for Robbie to set up all the files, cut each individual layer and then stick each layer on top of each other, in the right order.
We had to do it in 4 sections because it had to be shipped to Malaysia.
Posted: 19th January 2011
Posted in: Laser Etching & Router Cutting, Point Of Sale & Marketing Material
Here are a couple of pics from a job we did a little while back. They are some Wooden Laser Etched Point of Sale Stands for Billabong Australia, here on the Gold Coast. We gave the guys few different types of woods to choose from. They ended up choosing the New Guinea Rosewood, which is a re-newable plantation hard wood. It has a beautiful bright rose colour scattered throughout the grain.
Nice.
Final Product…..
Posted: 4th January 2011
Posted in: Design & Illustration, Detailed Joinery & Graphic Fit-Outs
Here are some shots of an Office Graphics fit-out we did for McCarthy Consulting Group, in Southport on the Gold Coast, late last year.
All Concept and Design was done in-house by our design team, as well as all Production and Installation.
Front Reception – Customised Printed Textured Wallpaper, 30mm Routed and 2 pak MCG sign and Laser Cut Lettering across Front Reception Desk.
Office Window Graphics – Printed and Contour Cut Frosted Etch Reverse Applied with Vinyl Cut MCG Logo Face Applied.
Front Entrance Doors – Frosted Etch Reverse Applied with Vinyl Cut MCG Logo Face Applied.
Posted: 13th December 2010
Posted in: Presentation Books & Folders
Here are some Denim Wrapped Folders we made for a client of ours. Our professional binder made these all by hand. After carefully planning where all the pockets were going to sit, we cut up the jeans and wrapped the folders. After that we Laser-etched the clients logo onto the back pocket and finished it off with a clasp to fold the folder together. The final result looked amazing!
Posted: 5th November 2010
Posted in: Presentation Books & Folders
Here are some Hand Bound Hard Case Folders we did for Lifetime Developments recently. Each hard case box is hand bound and foiled. Each folder is hand wrapped with a printed cover and bound with inner screws. We did 50 individual boxes which took our professional binder a couple of days to finish. Well worth all the effort for the finished product.
Posted: 4th November 2010
Posted in: Detailed Joinery & Graphic Fit-Outs
Here are some images of an Office Graphics Fit-out we did for ATPM in Coolangatta.
It was quite a large install. Well done to the guys for making it look as good as it does!
Front entrance – Glass graphics, Vinyl Wall Graphics and Large recessed Signage
Wall Graphics
Glass Graphics
Chalk Board Vinyl
Large 2pack Signage
Posted: 18th August 2010
Posted in: Laser Etching & Router Cutting, Point Of Sale & Marketing Material
Gotta love the Element guys and their great ideas. Here are some of their new POP merchandise we’ve done for them. Laser etched vintage wooden kerosene boxes for their new Denim and Shoe ranges. As well as a Laser etched antique wooden stand for the Element Eden Range. Great brand, always thinking outside the box…….. ha ha, no pun intended.
Posted: 18th August 2010
Posted in: Detailed Joinery & Graphic Fit-Outs
Here are some before and after Rotative Images of the UNIT Showroom Wall Graphics we did for their Hi Summer 2010 Range Release.
Hand crafted design solutions for forward thinking industries
